- 🐶 FOR SMALL PETS UNDER 15 LB: Designed for compact dogs and cats weighing up to 15 pounds. The manufacturer recommends a nose-to-tail-base length under 17 inches.
- 🚗 CENTRE-CONSOLE DESIGN: Fits between the driver and passenger seats in compatible cars, SUVs and trucks. Measure the console area carefully before purchasing.
- ☁️ MEMORY FOAM CUSHIONING: Oxford fabric and supportive memory foam create a padded resting space. Allow the vacuum-packed foam at least six hours to regain its shape.
- 🔗 BUILT-IN HARNESS TETHER: An internal safety leash helps limit movement during travel. Attach it only to a properly fitted harness, never directly to a collar.
- 🎒 2-IN-1 TRAVEL DESIGN: Padded handles, storage pockets and removable components allow the seat to function as a portable pet carrier or temporary bed outside the vehicle.
Cullaby Centre Console Dog Car Seat
The Cullaby centre-console dog car seat provides a padded travel space for small dogs and cats weighing up to 15 pounds. Its narrow design is intended to sit between the front seats of compatible vehicles, keeping the pet in a designated area instead of loose on the driver’s lap.
The black Oxford fabric exterior contains memory foam cushioning, an internal water-resistant liner, an anti-slip layer and a built-in tether intended for attachment to a pet harness.
Designed for Small Dogs and Cats
Weight alone does not determine whether a pet will fit comfortably. The manufacturer recommends checking that the pet measures less than 17 inches from the nose to the base of the tail.
The animal should be able to sit and lie down without being tightly compressed against the sides.
Measure the Pet Before Ordering
Measure:
- Weight
- Nose-to-tail-base body length
- Seated height
- Shoulder width
- Space required to turn around
- Preferred sleeping position
If the pet is close to the 15-pound or 17-inch limit, the seat may not provide enough room for comfortable movement.
Confirm Vehicle Compatibility
Centre consoles vary significantly between vehicle models. The listing describes the product as suitable for many sedans, SUVs and trucks, but compatibility is not universal.
Measure the available space between the front seats, including the console width, length and clearance around the armrest.
Check the Driving Area
The installed seat must not interfere with:
- Gear selector
- Parking brake
- Seat-belt buckles
- Climate or media controls
- Cupholders needed by the driver
- Driver arm movement
- Visibility through windows and mirrors
- Steering or pedal operation
- Airbag deployment zones
Do not install the product if it moves into the driver’s space or encourages the pet to climb onto the driver.
Memory Foam Padded Interior
The seat combines Oxford fabric with memory foam cushioning to create a padded base and supportive sides. The liner is described as water resistant, helping protect the foam from minor spills and everyday moisture.
Water resistant does not mean waterproof. Clean accidents promptly and check that moisture has not reached the foam.
Vacuum-Packed Foam Expansion
The product may arrive compressed for shipping. After unpacking, place it in a well-ventilated room and allow at least six hours for the foam to expand.
Before First Use
- Remove all packaging carefully.
- Avoid cutting the fabric or foam.
- Allow the seat to expand on a flat surface.
- Reshape compressed areas gently.
- Confirm that the walls and base are evenly formed.
- Do not use it in the vehicle while severely compressed or misshapen.
Expansion time can vary with temperature and shipping conditions.
Built-In Pet Harness Tether
The internal leash is intended to help limit the pet’s movement within the seat. It should be clipped to a correctly fitted body harness.
Never attach the tether to a neck collar, slip lead or head collar. Sudden braking could place dangerous force on the pet’s neck.
Adjusting the Tether
The tether should be short enough to prevent the pet from reaching the driver or leaving the seat, but long enough for the animal to sit and lie down naturally.
Inspect Before Every Journey
Check:
- Tether webbing
- Adjustment hardware
- Clip operation
- Stitching and anchor point
- Vehicle attachment straps
- Anti-slip base
- Pet harness fit
Stop using the seat if any strap, clip, seam or anchor point is loose, frayed or damaged.
Portable Carrier and Pet Bed
Padded carry handles allow the product to be moved outside the vehicle. The seat may also serve as a temporary pet bed at home, in a hotel or at another indoor destination.
Storage pockets provide space for small travel items such as waste bags, a compact leash or grooming supplies.
Carrying Precautions
The source describes the product as a pet carrier, but does not provide separate carrying-capacity or enclosure details. Keep the pet supported and prevent jumping when transporting it outside the vehicle.
Do not lift the product by one strap or leave the pet unattended inside it.
Cleaning and Maintenance
The listing describes the seat as detachable and washable. Remove the washable components according to the supplied instructions and care label.
Suggested Cleaning Steps
- Remove the pet from the seat.
- Detach the cushion, cover or liner as directed.
- Remove loose fur with a vacuum or soft brush.
- Use mild detergent and the care-label washing method.
- Do not wash or soak memory foam unless expressly permitted.
- Air dry all components completely.
- Reassemble only when fully dry.
- Confirm that straps and the tether are correctly positioned.
Protecting the Memory Foam
Avoid bleach, harsh chemicals and high heat. If the foam becomes wet, allow it to dry fully in a ventilated area before putting it back into the cover.
Product Specifications
- Brand: Cullaby
- Product type: Centre-console pet car seat, booster and carrier
- Colour: Black
- Recommended pet weight: Up to 15 lb
- Recommended pet length: Under 17 in from nose to tail base
- Materials: Oxford fabric and memory foam
- Interior protection: Water-resistant liner
- Base feature: Anti-slip fabric layer
- Restraint: Built-in harness tether
- Portability: Padded carry handles
- Storage: Exterior storage pockets
- Listed display dimensions: 17.72 in L × 10.63 in W × 9.06 in H
- Amazon product dimensions: 19.68 × 10.63 × 9.06 in
- Item weight: Approximately 1.63 lb
- Foam recovery period: At least 6 hours
- Manufacturer: Beewarm
Dimension Notice
The Amazon source displays two different length measurements: 17.72 inches in the main specifications and 19.68 inches under product details. Verify the current package measurements and available console space before ordering.
Important Vehicle Safety Guidance
This product has not been identified in the source as independently crash tested or certified as a vehicle restraint system. Terms such as “safety leash” describe the included tether and should not be interpreted as a guarantee of protection during a collision.
Safer Travel Practices
- Follow local laws concerning animal restraint in vehicles.
- Attach the tether only to a properly fitted harness.
- Never attach it directly to a collar.
- Do not allow the pet onto the driver’s lap.
- Do not place the seat in an active airbag deployment zone.
- Confirm that installation does not obstruct vehicle controls.
- Keep windows closed enough to prevent the pet from jumping out.
- Never leave a pet unattended in a parked vehicle.
- Stop regularly during long journeys.
- Replace the product after any collision or structural damage.
- Consider a securely anchored rear-seat carrier or crash-tested restraint when greater collision protection is required.
A centre-console pet seat can provide a comfortable designated space, but correct installation, attentive driving and an appropriate restraint remain essential.
