- 📏 COMPACT 18-INCH CRATE: Measures 18 × 12 × 14 inches and is designed for puppies or very small dogs that can stand, turn around and lie down comfortably inside.
- 🔒 SINGLE DOOR WITH DUAL LATCHES: The front door uses two slide-bolt latches to help maintain a secure closure during supervised crate training and indoor use.
- 🛡️ COATED METAL WIRE: High-tensile wire with a black epoxy coating provides an open, ventilated structure with resistance to rust, corrosion and fading.
- 🧼 REMOVABLE ABS TRAY: The leak-resistant plastic pan slides out for cleaning and includes a raised perimeter lip to help contain minor spills and accidents.
- 📦 FOLDABLE, TOOL-FREE SETUP: The connected wire panels unfold in minutes without tools and collapse to less than three inches thick for compact storage.
- 🧳 REMOVABLE CARRY HANDLE: The handle can be mounted on different sides of the folded crate, making it easier to move or store when empty.
- 🏠 FOR HOME AND TRAINING: Suitable for creating a supervised rest area at home, introducing crate routines and temporary use during appropriate travel situations.
FDW 18-Inch Foldable Metal Dog Crate
Create a compact resting and training space for a compatible puppy or very small dog with the FDW 18-inch wire crate. The foldable structure combines a single front door, dual slide-bolt latches and a removable plastic tray.
Its collapsible design requires no tools for setup and folds to a slim profile when it needs to be stored or transported while empty.
Compact Size for Very Small Dogs
The crate measures 18 inches long, 12 inches wide and 14 inches high. These dimensions make it most appropriate for puppies and very small dogs whose adult or current body measurements fit safely inside.
Check Your Dog’s Measurements
A correctly sized crate should allow the dog to:
- Stand without touching the top
- Sit in a natural position
- Turn around without difficulty
- Lie on its side with reasonable comfort
- Enter and exit without crouching excessively
The description “small dog” is not enough to confirm compatibility. Measure your dog’s height and body length before ordering.
Single Front Door
The front-facing door creates one primary entrance and exit point. Rounded wire edges are intended to reduce exposure to sharp metal surfaces during normal use.
Dual Slide-Bolt Latches
Two slide bolts secure the door at separate points. Move each latch completely into the locked position and test the door gently before leaving the dog inside.
A crate is not escape-proof. Dogs that bend wire, manipulate latches or panic when confined require a different containment solution and professional guidance.
Foldable Wire Construction
The panels arrive connected and unfold into position without separate tools. Once opened, the frame locks into its full crate shape for normal use.
Folds to Less Than Three Inches Thick
When not in use, the crate collapses into a package under three inches thick. Its flat profile is easier to store under suitable furniture, against a wall or in a vehicle cargo area.
Secure the Crate Before Moving It
Remove the dog, bedding, bowls and other items before folding the crate. Confirm that the folded panels are secured before lifting it by the handle.
Removable Carry Handle
The included handle can be fitted to different sides of the folded crate. This allows the carrying position to be adjusted according to storage or transport needs.
The handle is for moving the empty crate. Never lift or carry the crate by its handle while an animal is inside.
Coated Metal Wire Frame
The crate uses high-tensile wire with a black epoxy coating. The open-wire layout provides ventilation and lets the dog see its surroundings.
Resistance to Rust and Corrosion
The coating is designed to help protect the metal against rust, corrosion and fading. Damage to the finish can expose the wire beneath, so inspect the crate regularly.
Indoor and Outdoor Use Limitations
Although the listing mentions indoor and outdoor use, this wire crate is not a weatherproof shelter. Use it outdoors only temporarily, under direct supervision and in safe weather.
Never leave a dog exposed to heat, cold, rain, direct sunlight or insects inside the crate.
Removable Leak-Resistant Tray
A lightweight ABS composite tray sits beneath the wire floor area. It can be removed for cleaning without opening the main crate door when the retaining bar is released.
Raised Perimeter Lip
The integrated lip around the tray helps contain minor spills, loose hair and pet accidents instead of allowing them to spread immediately onto the surrounding floor.
Leak Resistant Does Not Mean Spill-Proof
Large amounts of liquid may still escape during movement or if the tray is cracked or incorrectly positioned. Place the crate on a washable, protected surface when necessary.
A Practical Crate-Training Space
The crate can provide a designated place for resting and short periods of supervised management when introduced gradually and positively.
Build a Positive Association
Encourage your dog to enter voluntarily using treats, meals or familiar bedding. Begin with short sessions and increase the time slowly according to the dog’s comfort.
Never Use the Crate as Punishment
The crate should not be used for frightening, isolating or controlling a distressed dog. Persistent barking, drooling, escape attempts or self-injury can indicate anxiety and require professional help.
Product Specifications
- Brand: FDW
- Product type: Foldable metal wire dog crate
- Selected pattern: 18 Inch Single Door
- Colour: Black
- Open dimensions: 18 × 12 × 14 in
- Approximate metric dimensions: 45.7 × 30.5 × 35.6 cm
- Primary material: Metal wire
- Tray material: ABS composite plastic
- Door configuration: One front door
- Door security: Two slide-bolt latches
- Finish: Black epoxy coating
- Assembly: Tool-free folding setup
- Folded thickness: Less than 3 in
- Tray: Removable with raised perimeter lip
- Handle: Removable carrying handle
- Suggested pet size: Compatible puppies and very small dogs
- Manufacturer: FDW
- PDF-listed ASIN: B0FG86MD8X
How to Set Up the Crate
Tool-Free Assembly
- Place the folded crate on a level floor.
- Release any transport fasteners.
- Unfold the front, back and side panels carefully.
- Raise the top panel and secure the frame connections.
- Confirm that every corner is correctly locked.
- Insert the ABS tray beneath the crate.
- Secure the tray-retaining mechanism.
- Test the door and both slide-bolt latches.
Inspect Before Adding Bedding
Run your hand carefully around the exterior and interior to check for bent wires, sharp edges or loose connections. Do not use the crate if any component could injure the dog.
Cleaning and Care
Remove the dog and all accessories before cleaning. Slide out the ABS tray and wash it with mild soap and water. Rinse it thoroughly and dry it before reinserting it.
Wipe the coated wire with a damp cloth and dry it promptly. Avoid bleach, abrasive brushes and corrosive cleaners that may damage the finish.
Clean and inspect the crate after accidents. Replace the tray if it cracks, warps or develops sharp edges.
Safety Information
Remove collars, harnesses, tags and leashes before leaving a dog inside the crate because they can become caught on the wire. Provide adequate ventilation and never cover the entire crate.
Do not leave puppies or adult dogs confined for excessive periods. Ensure regular opportunities for exercise, water, toileting and social interaction.
This foldable wire crate is not a crash-tested vehicle restraint and should not be occupied while being carried. Place it only on a stable surface away from stairs, heaters, open flames and direct sunlight. Stop using it if the wire bends, coating peels, latches fail or the dog shows signs of distress.
