- 🚿 THREE WATER SETTINGS: Switch between spray, stream and pause modes using the integrated control, making it easier to wet fur, target specific areas and temporarily reduce water flow.
- 🐕 BUILT-IN SILICONE BRUSH: The soft brush surface helps work water through the coat while loosening surface dirt and providing gentle grooming during bath time.
- 🔀 CORROSION-RESISTANT METAL DIVERTER: The included three-way G1/2 shower diverter directs water between the existing showerhead and pet sprayer without repeatedly disconnecting the hose.
- 📏 EXTRA-LONG 78-INCH HOSE: The flexible hose provides additional reach around baths and shower enclosures, helping users rinse the legs, underside and back of different-sized pets.
- 🛠️ CONVENIENT HOME INSTALLATION: Includes the components required for a compatible indoor shower connection and a no-drill holder. Confirm thread size and bathroom compatibility before installation.
V-Frankness 3-Mode Dog Shower Attachment
The V-Frankness dog shower attachment provides a dedicated handheld sprayer for bathing dogs and other suitable household pets. It combines three water settings, a built-in silicone grooming brush, a metal diverter and an extra-long hose in one indoor bathing system.
The selected variation has a brushed-nickel finish and includes a 78-inch hose for improved reach around a bathtub or shower enclosure.
Three Water Modes for Pet Bathing
The handheld sprayer offers three selectable settings:
- Spray mode: Distributes water across a wider area for wetting and general rinsing.
- Stream mode: Produces a more focused flow for targeted rinsing.
- Pause mode: Temporarily reduces or interrupts flow while shampooing or repositioning the pet.
The most suitable mode depends on the household water pressure, coat type, pet size and the area being rinsed.
Pause Is Not a Permanent Shutoff
The pause setting is intended for brief interruptions during bathing. It should not replace turning off the main shower control after use.
When bathing is complete, close the household water valve and release pressure from the sprayer. Leaving the system continuously pressurized may place unnecessary strain on the hose, diverter and connections.
Built-In Silicone Grooming Brush
Cleaning and Grooming in One Hand
The sprayer head includes an integrated silicone brush. It can help separate the coat, loosen surface dirt and distribute water while the pet is being washed.
This design allows the user to control the sprayer and brush the coat with the same hand, leaving the other hand available to steady and reassure the pet.
Gentle Use Around Sensitive Areas
Use light pressure and avoid brushing directly over:
- Eyes, ears and nose
- Open wounds or irritated skin
- Recent surgical areas
- Painful joints
- Severe mats or tangles
- Unexplained lumps or swelling
The integrated brush is intended for routine bathing and is not a replacement for a professional grooming tool, dematting equipment or veterinary treatment.
Extra-Long 78-Inch Shower Hose
The included 78-inch hose provides additional movement compared with a short fixed showerhead. It helps users reach around the pet without repeatedly turning or repositioning the animal.
Flexible Bathing Reach
The extended hose can be useful for:
- Rinsing underneath the body
- Washing legs and paws
- Reaching larger dogs
- Bathing smaller pets at floor level
- Cleaning the bathtub or shower after use
Actual reach depends on the installation position, shower layout and routing of the hose.
Prevent Kinks and Surface Damage
Route the hose without sharp bends and do not trap it beneath heavy objects. Avoid dragging metal components across delicate shower fixtures, glass or finished surfaces.
Inspect the hose before use and replace it if it develops cracks, severe kinks, corrosion or leakage.
Metal Three-Way Shower Diverter
Switch Between Two Water Outlets
The included all-metal three-way diverter is designed to connect the pet sprayer alongside an existing showerhead. Its control lever redirects water between the available outlets.
This arrangement allows the regular showerhead to remain installed while providing a separate hose for pet bathing.
G1/2 Connection Compatibility
The listing identifies the indoor diverter connection as G1/2 inch. This is a common shower-thread format, but plumbing standards and existing fixtures vary.
Before ordering or installation:
- Check the thread type and diameter of the existing shower arm.
- Confirm that enough clearance is available for the diverter.
- Inspect the condition of the shower arm and threads.
- Determine whether an additional adapter is required.
- Consult a qualified plumber if the connection type is uncertain.
Do not force incompatible threads together, as this may damage the fitting and cause leaks.
Installation Guide
Before Installation
Turn off the water supply at the shower control and allow any remaining pressure to drain. Protect the finish of metal parts when using tools.
Read the included instructions because component shapes and installation requirements may vary between production versions.
General Installation Steps
- Remove the existing showerhead from the shower arm.
- Clean old sealing material and debris from the exposed threads.
- Apply suitable thread-sealing tape where instructed.
- Attach the G1/2 three-way diverter without cross-threading it.
- Reconnect the existing showerhead to the appropriate outlet.
- Connect the pet-shower hose to the remaining outlet.
- Attach the handheld sprayer to the hose.
- Install the no-drill holder on a clean, suitable surface.
- Turn on the water gradually.
- Check every connection for leaks before bathing a pet.
Do not overtighten the fittings. Excessive force can damage threads, seals and plated finishes.
Installing the No-Drill Holder
Clean and dry the mounting area before attaching the holder. Smooth, non-porous surfaces generally provide better adhesion than textured, damp or porous walls.
The holder’s performance depends on the mounting surface and installation quality. Confirm that it is secure before placing the sprayer in it.
Leak Checks
If a connection leaks:
- Turn off the main water control.
- Release residual pressure.
- Check that the fitting is correctly aligned.
- Inspect the washer or sealing ring.
- Reapply thread-sealing tape if required.
- Tighten carefully without using excessive force.
Persistent leaks may indicate incompatible plumbing, a damaged seal or a defective connection.
Bathing Your Dog Safely
Prepare Before Turning on the Water
Keep shampoo, towels and grooming supplies within reach. Brush loose hair from the coat and use a non-slip bath mat where appropriate.
Test the water temperature and spray strength with your hand before directing it toward the pet.
Suggested Bathing Process
- Introduce the sprayer while it is turned off.
- Begin with lukewarm water and a gentle setting.
- Wet the body gradually, starting away from the head.
- Apply pet-safe shampoo according to its directions.
- Use the silicone brush with light, controlled movements.
- Rinse thoroughly until no shampoo remains.
- Turn off the main water control.
- Towel-dry the pet and keep it warm.
Avoid spraying directly into the eyes, ears, nose or mouth.
Water Pressure and Performance
The product is marketed as a high-pressure shower attachment, but output depends on the building’s water supply, plumbing, valve position, hose condition and existing shower system.
The attachment cannot independently increase pressure beyond what the plumbing system can provide.
Adjust Flow for the Pet
Begin with a low or moderate flow, especially with puppies, cats, senior animals or pets unfamiliar with bathing. Increase the flow only if the pet remains comfortable.
Stop If the Pet Shows Distress
Pause the bath if the pet displays:
- Persistent attempts to escape
- Trembling or excessive panting
- Vocal distress
- Aggressive or defensive behaviour
- Breathing difficulty
- Skin discomfort
Seek veterinary or professional grooming guidance when routine bathing cannot be performed safely.
Cleaning and Maintenance
After Each Use
Rinse hair, shampoo and debris from the sprayer and silicone brush. Drain the hose and place the sprayer securely in its holder.
Wipe the brushed-nickel finish with a soft cloth to reduce water spots.
Routine Maintenance
- Inspect washers and threaded connections regularly.
- Remove hair and residue from the silicone brush.
- Check the hose for kinks, cracks and leaks.
- Clean mineral deposits according to the manufacturer’s directions.
- Avoid abrasive pads and harsh chemical cleaners.
- Turn off the main water control after every use.
- Do not leave the hose under continuous pressure.
Product Specifications
- Brand: V-Frankness
- Product type: Handheld pet shower attachment
- Selected finish: Brushed nickel
- Selected hose length: 78 inches
- Spray settings: Spray, stream and pause
- Brush: Integrated silicone grooming brush
- Diverter: Three-way, all-metal shower diverter
- Indoor connection: G1/2 inch
- Primary materials: Metal and plastic
- Sprayer shape: Round
- Mounting accessory: No-drill sprayer holder
- Intended use: Indoor pet bathing and rinsing
- ASIN: B0GF2RKFHW
Important Safety Information
Always test the water temperature before bathing an animal. Use lukewarm water and avoid excessive pressure on sensitive skin.
Do not allow pets to chew the hose, sprayer or small installation components. Keep packaging and loose parts away from children and animals.
This product does not replace veterinary care or professional grooming. Consult a veterinarian if the pet has a skin condition, infection, wound, recent surgery or medical restriction affecting bathing.
